You have no items in your shopping cart.
Energiasolare100
Solar photovoltaic kit 1KW 24V hybrid EpEver pure wave UP3000-M6322 3KW 60A inverter tubular plate acid battery
This kit can also be used in a residential environment as the inverter supports the AC mains or a current generator as input. The system allows automatic grid / photovoltaic switching. This kit can be used to create Off-grid photovoltaic systems completely disconnected from the electricity grid, allowing you to power your utilities even in places not served by the electricity grid, for example huts and country houses as long as, of course, there are batteries.
System operation mode
By connecting the Edison inverter to the solar panels and programming it in photovoltaic inverter mode, it powers the loads by drawing energy directly from the photovoltaic system. In the event that the electricity from the photovoltaic system is not sufficient to power the loads, the inverter will also draw energy from the batteries. The edison will switch to the grid or generator when the photovoltaic or battery power is unable to power the load. The inverter can also work only with batteries and solar panels and therefore without the aid of the electricity grid or the generator.
375W 24V Monocrystalline solar panel
The HF series photovoltaic solar modules are ideal for camper applications, boating, isolated houses and much more.
These solar panels are particularly robust and resistant to salt spray corrosion, extreme work environments and mechanical stresses such as snow and wind.
The connection can be made from the heavy cables on the junction box on the back of the panel, through MC4 connectors.
To connect the panel, they recommend the purchase of a pair of MC4 connectors .
The performances are excellent, these are modules with high efficiency class "A" monocrystalline silicon photovoltaic cells, reliable and resistant.
Each module is individually tested to ensure compliance with standards and certifications.
Characteristics of the photovoltaic panel:
Specific Certifications: ISO9001, ISO14001, IEC Certified, TUV, CE
Module efficiency up to 20.08%
Only positive power tolerance
EL Test (Electroluminescence) on 100% of production
Low weight (only 20kg)
Extremely low level of degradation
Double insulation
Anti-reflective tempered glass
10-year product warranty
90% power output warranty for 15 years
80% power output guarantee for 30 years
Dimensions 1768 × 1048 × 35mm
High conversion efficiency thanks to Half-Cut type PERC cell technology.
High module reliability thanks to the reduction of micro-cracks and reduction of internal power losses.
Inverter EPEver 3KW 3000W 24V pure sine wave battery charger with 60A charge controller
EPEver returns to the market with a new series of Inverter / Charger products: UPower Series .
This new Inverter / Charger Series with advanced MPPT technology , a multi-core and pure sine wave processor that combines solar charging, grid connection and AC output.
Another important feature is the charging mode , it offers four : Solar Priority, National Grid Priority, National and Solar Grid; two output modes that allow the load to be powered either by the battery or by the national grid, thus allowing to satisfy the user's needs.
The LCD display allows the visualization of the operating data of the system and of the executive status, the multiple LED indicators indicate the status, in an instantaneous manner, of the operation of the system.
They also come with 2P switches present at the end of the utility input.
TECHNICAL FEATURES
Nominal battery voltage = 24 VDC
Battery input range = 21.6 ~ 32VDC
INVERTER OUTPUT
Continuous output power = 2400W
Output power (15min) = 3000W
Overload power (5s) = 4800 W.
Max. peak power = 6000W
Output voltage range = 220VAC +/- 5%, 230VAC (-10% ~ + 5%)
Output frequency = 50/60 +/- 0.1 Hz
Output mode = Single phase
Output wave = pure sine wave
Maximum efficiency = 95%
Transfer time = 0 ~ 20ms
INPUT UTILITY
Utility input voltage range = 160VAC ~ 280VAC (working voltage range) / 170VAC ~ 270VAC (Untility starting voltage range)
Max. Utility charge current = 30A
SOLAR CHARGING
Max. PV open circuit voltage = 138-150 V.
Max. PV input power = 1500 W. Max. Photovoltaic charging current = 60A
Efficiency detection = <99.5%
Max. charging conversion efficiency = 98%
GENERAL
Consumption at zero load = <0.8 A.
Container = IP30
Relative humidity = <95% (NC)
Working environment temperature = -20 ° C ~ 50 ° C (full input and output without derating)
MECHANICAL PARAMETERS
Dimensions = 518 x 310 x 168 mm
Mounting size = 230mm
Net Weight = 14.9KG
Prime free acid solar battery OP 260Ah 6V Tubular plate for stand-alone or storage photovoltaic systems
The 'Prime OP ' are part of the Light Traction Batteries with Tubular Plate, these are formed by Thickened and Oversized Tubular Plates that guarantee better performance and a prolonged duration over time, at the same time they allow a good resistance regarding the mechanical stresses to which they can be subjected due to the usual uses.
These batteries, thanks to the shape of their plates (tubular) allow very deep discharges and allow the achievement of the greatest number of cycles even during particularly onerous jobs.
These are types of batteries used in the telecommunications sector, the photovoltaic sector (such as professional off-grid or storage solar systems) and in transport in electric vehicles.
Evaluating the Life Cycles is very important to determine a Useful life for the Off-grid and Storage Photovoltaic Solar System.
However, it is possible to predict the maximum duration of our batteries by analyzing the discharge curve.
Life cycles with a DOD of 85% of 1000 cycles
Life cycles with a DOD of 50% of 1600 cycles
Life cycles with a 30% DOD of 2400 cycles
( The reported value means continuous cycles per day up to the minimum DOD discharge value).
Warnings:
Never download over 80%
Do not leave the battery unused
Caratteristiche
