This solar photovoltaic kit consisting of solar panels and Edison V2 3KW 24V Hybrid Solar Inverter MPPT 80A 500VDC 4kW PV Charge Controller even without battery, is ideal to start a small photovoltaic system for your home. The 430W Monocrystalline Solar Panels are ideal for RV applications, boating, isolated homes, camper and much more.These solar panels are particularly robust and resistant to salt spray corrosion, extreme work environments and mechanical stresses such as snow and wind. it can be carried out from the heavy cables on the junction box on the back of the panel, through MC4 connectors. The performances are excellent, these are modules with high efficiency class "A" monocrystalline silicon photovoltaic cells, reliable and resistant.

The new pure wave hybrid inverter ED30MPII is a 3KW 24V inverter with 80A high frequency battery charger function and 80A MPPT charge controller for photovoltaic panels designed to meet all the needs that the STORAGE market for photovoltaic systems today requires.

Edison series inverters can operate both in UPS mode, thus giving priority to the electricity grid and subsequently to the batteries in the event of a black-out; both in inverter mode providing priority to the batteries or even to the photovoltaic generator and subsequently to the electricity grid in case the renewable sources are unable to supply energy, all following a logic of events that can be programmed via the display.

The novelty of this new version is the possibility to work even without batteries , directly from photovoltaics with the obligation of a connected electricity grid.

Edison V2 Operating in Inverter Mode with Grid Switching

The Edison V2 inverter, connected to the solar panels and programmed it in photovoltaic inverter mode, powers the loads by drawing energy directly from the photovoltaic system. In the event that the electricity from the photovoltaic system is not sufficient to power the loads, the inverter will also draw energy from the batteries. The edison will switch to the grid or generator when the photovoltaic or battery power is unable to power the load. Thanks to the presence of an integrated 80A MPPT charge controller with a voltage range of 120-500Vdc, it is possible to create a single string of photovoltaic panels up to a maximum power of 4kW, thus saving time and wiring during the installation phase.

Edison V2 Operating in Solar Inverter Mode Without Battery

The peculiarity of the EDISON V2 solar inverter is that it can also work WITHOUT BATTERY, but it is strictly necessary that the photovoltaic solar panels and the national electricity grid are connected to the inverter. The reason that both sources of energy supply must be connected to the inverter is because the production of the photovoltaic panels may not be sufficient to power the load or even unstable due to cloudiness and therefore the inverter will be able to continue to power the load. by connecting to the national electricity grid.

Edison V2 Operating in Off-grid Inverter Mode

In areas where there is no national electricity grid, the Edison V2 solar photovoltaic inverter is an excellent solution to build an island photovoltaic system in a simple and fast way, thanks to the presence of a charge controller inside it. In this operating mode it is necessary to connect the batteries to the inverter in order to provide stable energy to the load and have a stable system.

Edison V2 operating in UPS Mode

In the event that there are areas where there is an unstable power line with possible power supply interruptions, the Edison V2, through a special programming using the buttons on the front panel or via a computer, is also capable of operating as a UPS allowing continuity of the energy supply service to your loads, avoiding unpleasant situations. Switching from the mains to the batteries is completely imperceptible, avoiding the annoying problem of switching off loads during their operation. In addition, the inverter can be programmed, the input voltage range, to safeguard loads sensitive to voltage fluctuations from the grid.

Remote Monitoring and Control

You can monitor and control your Edison V2 photovoltaic inverter either on-site via the connection to your computer with the cables provided or by using the V-WIFI device (optional) if a WI-FI network is available. With V-WIFI you can, from anywhere in the world with your tablet, computer or smartphone, check and monitor the operating status of your inverter via the Watch Power app. You will also be able to check all the various errors that have occurred since the app was enabled, as well as the status of photovoltaic production, battery voltage, grid voltage, operating mode and much more.