The new hybrid pure wave inverter MPGEN50V4 is a 5.6KW 48V inverter with 120A high frequency battery charger function and 120A MPPT charge controller for photovoltaic panels designed to meet all the needs that the STORAGE market for photovoltaic systems requires today. .

• Maximum photovoltaic power equal to 6KW.
• It has a customizable circular LED with RGB light.
  
• The inverter can be connected in parallel with other machines (up to 9 inverters).
• Integrated wifi monitoring system that allows you to monitor the system via APP.
• Touch button with 4.3 "color LCD display
• Communication port for BMS.
  
• Inverter internal data storage system.
• Equipped with auxiliary contacts (3A / 250VAC) for battery voltage alarm devices
• It can work without battery
• Compatible with pylotech battery - weco

The inverter can operate both in UPS mode, thus giving priority to the electricity grid and subsequently to the batteries in the event of a black-out; both in inverter mode providing priority to the batteries or even to the photovoltaic generator and subsequently to the electricity grid in case the renewable sources are unable to supply energy, all following a logic of events that can be programmed via the display. Furthermore, in photovoltaic operating mode with the presence of an enel network, it can work WITHOUT BATTERIES

MPGEN50V4 Operation in Inverter Mode with Grid Switching

The MPGEN50V4 inverter, having connected it to the solar panels and programming it in photovoltaic inverter mode, powers the loads by drawing energy directly from the photovoltaic system. In the event that the electricity from the photovoltaic system is not sufficient to power the loads, the inverter will also draw energy from the batteries. The inverter will switch to the grid or generator when the photovoltaic or battery power is unable to power the load.
Thanks to the presence of an integrated 120A MPPT charge controller, photovoltaic panels up to a maximum power of 6KW can be connected, saving time and wiring during the installation phase.

Inverter operation in Off-grid Inverter Mode

In areas where there is no national electricity grid, the MPGEN50V4 solar photovoltaic inverter is an excellent solution to build an island photovoltaic system in a simple and fast way, thanks to the presence of a charge controller inside.
In this operating mode it is necessary to connect the batteries to the inverter in order to provide stable energy to the load and have a stable system.

MPGEN50V4 operation in UPS mode

In the event that there are areas where there is an unstable power line with possible power supply interruptions, the MPGEN50V4, through a special programming using the buttons on the front panel or via a computer, is also capable of operating as a UPS allowing continuity of the service. power supply to your loads avoiding unpleasant situations. Switching from the mains to the batteries is completely imperceptible, avoiding the annoying problem of switching off loads during their operation.
In addition, the inverter can be programmed, the input voltage range, to safeguard loads sensitive to voltage fluctuations from the grid.