(+39) 080.4780349 (tel)
(+39) 080.4786928 (tel/fax)
Lun. - Ven. 8:30 - 13:30 / 14:15 - 18:30
Sab. 8:30 - 12:15

Green Energy

MPPT solar Charge Controller 10A 12V 24V EpSolar Tracer BN series

SKU: TRACER1215BN
Shipped in: 24-48h
 

Availability:Out of stock

€62.46
IVA Esclusa

ENTRA NELLA SQUADRA ENERGIASOLARE100

Sei un installatore? Registra subito la tua azienda.

Product Description

MPPT Charge Controller 10A 12V 24V EpSolar Tracer BN series

This regulator is part of the New Tracer Series by EpSolar: a new generation of MPPT regulators.

Compared to the classic Tracers, the possibilities for regulator communication are extended: in fact they can be connected to a PC and managed via software (downloadable below) or connected to the MT-50 remote display .

Compared to PWM regulators, MPPT technology increases the machine's efficiency by 30% and potentially decreases the necessary power that must be supplied by the solar panels.

Technical features

  • Diversified load control to meet different needs
  • Four different battery options: Sealed, Gel, Flooded and USER
  • Intelligent lighting with timer control for the solar lighting system
  • Energy statistics functions
  • RS4825 port with MODBUS communication protocol
  • Data monitoring through PC through dedicated software (or with remote display) and remote parameter management
  • Upgradeable firmware
  • Electrical protections : from overload, from short circuit, from battery overload, from polarity inversion, overheating

Technical data

Template EPT1015BN
System voltage 12 / 24V autowork
Rated current 10 A
Max Voltage Open Circuit Panels 150 V
Max Battery Voltage 32 V
Max Panel Input Power 130W (12V) / 260W (24V)
Charge Voltage Sealed: 14.6V, Flooded: 14.8V, USER: 9 ~ 17V
Boost Charge Voltage Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V, USER: 9 ~ 17V
Float Charge Voltage Gel / Sealed / Flooded: 13.8V, USER: 9 ~ 17V
Low voltage reconnection voltage Gel / Sealed / Flooded: 12.6V, USER: 9 ~ 17V
Low voltage disconnection voltage Gel / Sealed / Flooded: 11.1V, USER: 9 ~ 17V
Internal consumption ≤50mA (12V) ≤27mA (24V)
Temperature compensation -3mV / ℃ / 2V
Communication Protocols RS485 / RJ45
Dimension 196x118x36 mm
Weight 0.9 kg
Degree of protection IP30
Working Temperature -35 ℃ ~ + 55 ℃
Storage temperature -35 ℃ ~ + 80 ℃
Humidity ≤95% NC

Communication mode

As shown in the image, the controller can be fully controlled remotely, especially through the MT-50 Remote Display and from a PC with dedicated software.

It can be connected to a series of products in our catalog and can be purchased separately. Check the characteristics of each one to find out how to expand the potential of the regulator.

Accessories (not supplied)

MT-50 Remote Display

Remote Display including installation frame and 2m cable.

Cable for PC connection

It can be connected to a PC via a special communication cable, present in our catalog, and completely manageable by an EpSolar software downloadable below and installed on a PC.

Temperature sensor

Useful temperature probe to activate the temperature compensation of the connected batteries for a correct charge.

 

Additional Information

SKU TRACER1215BN
EAN 7427509335328
Manufacturer EPEVER
Shipped in 24-48h
Weight 1.0000
Nominal System Voltage 12/24V
Corrente Nominale 10A
Tipologia di Batteria AMG / GEL / FLOODED
Corrente di Autoconsumo ≤50mA(12V) ≤27mA(24V)
Dimensioni del Regolatore 196x118x36mm
Umidità ≤95% N.C.
Peso del Regolatore 0.9Kg
Temperatura di Conservazione -35℃~+80℃
Tecnologia del Regolatore MPPT
Temperatura di Lavoro -35℃~+55℃
Grado di Protezione IP30
Maximum PV Input Voltage 150V
self-consumption ≤50mA(12V) ≤27mA(24V)
Rated load current 10A

Reviews

Write Your Own Review

You're reviewing: MPPT solar Charge Controller 10A 12V 24V EpSolar Tracer BN series

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Download