Product Description
MPPT Charge Controller 10A 12V 24V EpSolar Tracer BN series
This regulator is part of the New Tracer Series by EpSolar: a new generation of MPPT regulators.
Compared to the classic Tracers, the possibilities for regulator communication are extended: in fact they can be connected to a PC and managed via software (downloadable below) or connected to the MT-50 remote display .
Compared to PWM regulators, MPPT technology increases the machine's efficiency by 30% and potentially decreases the necessary power that must be supplied by the solar panels.
Technical features
- Diversified load control to meet different needs
- Four different battery options: Sealed, Gel, Flooded and USER
- Intelligent lighting with timer control for the solar lighting system
- Energy statistics functions
- RS4825 port with MODBUS communication protocol
- Data monitoring through PC through dedicated software (or with remote display) and remote parameter management
- Upgradeable firmware
- Electrical protections : from overload, from short circuit, from battery overload, from polarity inversion, overheating
Technical data
Template | EPT1015BN |
System voltage | 12 / 24V autowork |
Rated current | 10 A |
Max Voltage Open Circuit Panels | 150 V |
Max Battery Voltage | 32 V |
Max Panel Input Power | 130W (12V) / 260W (24V) |
Charge Voltage | Sealed: 14.6V, Flooded: 14.8V, USER: 9 ~ 17V |
Boost Charge Voltage | Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V, USER: 9 ~ 17V |
Float Charge Voltage | Gel / Sealed / Flooded: 13.8V, USER: 9 ~ 17V |
Low voltage reconnection voltage | Gel / Sealed / Flooded: 12.6V, USER: 9 ~ 17V |
Low voltage disconnection voltage | Gel / Sealed / Flooded: 11.1V, USER: 9 ~ 17V |
Internal consumption | ≤50mA (12V) ≤27mA (24V) |
Temperature compensation | -3mV / ℃ / 2V |
Communication Protocols | RS485 / RJ45 |
Dimension | 196x118x36 mm |
Weight | 0.9 kg |
Degree of protection | IP30 |
Working Temperature | -35 ℃ ~ + 55 ℃ |
Storage temperature | -35 ℃ ~ + 80 ℃ |
Humidity | ≤95% NC |
Communication mode
As shown in the image, the controller can be fully controlled remotely, especially through the MT-50 Remote Display and from a PC with dedicated software.
It can be connected to a series of products in our catalog and can be purchased separately. Check the characteristics of each one to find out how to expand the potential of the regulator.
Accessories (not supplied)
Remote Display including installation frame and 2m cable.
It can be connected to a PC via a special communication cable, present in our catalog, and completely manageable by an EpSolar software downloadable below and installed on a PC.
Useful temperature probe to activate the temperature compensation of the connected batteries for a correct charge.
Additional Information
SKU | TRACER1215BN |
---|---|
EAN | 7427509335328 |
Manufacturer | EPEVER |
Shipped in | 24-48h |
Weight | 1.0000 |
Nominal System Voltage | 12/24V |
Corrente Nominale | 10A |
Tipologia di Batteria | AMG / GEL / FLOODED |
Corrente di Autoconsumo | ≤50mA(12V) ≤27mA(24V) |
Dimensioni del Regolatore | 196x118x36mm |
Umidità | ≤95% N.C. |
Peso del Regolatore | 0.9Kg |
Temperatura di Conservazione | -35℃~+80℃ |
Tecnologia del Regolatore | MPPT |
Temperatura di Lavoro | -35℃~+55℃ |
Grado di Protezione | IP30 |
Maximum PV Input Voltage | 150V |
self-consumption | ≤50mA(12V) ≤27mA(24V) |
Rated load current | 10A |
Reviews
Write Your Own Review
Product Tags
Download
Related Products
Ti potrebbe interessare
-
Regolatore di Carica MPPT 20A 12/24V EPEVER Tracer serie BN
€102.99 -
Regolatore di Carica MPPT 30A 12/24V EPEVER Tracer serie BN
€156.33 -
Epsolar MPPT Solar Charge Controller Tracer A series 20A 100Voc 12/24V with LCD display
€84.84 -
Regolatore di carica MPPT 20A EPEVER serie CN Tracer2210CN 100Voc per pannelli fotovoltaici
€67.88