(+39) 080.4780349 (tel)
(+39) 080.4786928 (tel/fax)
Lun. - Ven. 8:30 - 13:30 / 14:15 - 18:30
Sab. 8:30 - 12:15

Green Energy

Solar Charge Controller with built in LED Driver 10A 12V/24V LS102460LPLI lead-acid battery and lithium battery IP68

The LandStar LPLI series controller combines the solar charge controller and LED constant current driver into one unit which is ideal for solar LED Lighting, especially for the application for LED lamp which requires dimmer function. The advanced pulse width modulation charging methods enables the system charging and discharging management to obtain the most radical optimization.
It Makes the system cost reduce, and increases the system flexibility.
SKU: LS102460LPLI
Shipped in: 24-48h

Availability:Out of stock

€22.66

ENTRA NELLA SQUADRA ENERGIASOLARE100

Sei un installatore? Registra subito la tua azienda.

Solar Charge Controller with built in LED Driver 10A 12V/24V LS102460LPLI lead-acid battery and lithium battery IP68

Solar Charge Controller with built in LED Driver 10A 12V/24V LS102460LPLI lead-acid battery and lithium battery IP68

You can select working mode and set parameters through IR Function by IR remote Controller RC-10 and Super Parameter programmer Fc-01 (NOT INCLUDED)

Solar Charge Controller for lead-acid battery and lithium battery

  • Apply to lead-acid battery and lithium battery
  • Lithium battery self-activating function
  • Lithium battery low temperature protection function
  • Intelligent power mode with 365-day lighting control technology
  • Load reduce power automatically
  • Load power limitation function
  • Maximum output efficiency of 96%
  • Digital precision constant current control and the control accuracy are less than±2%
  • Discharging power calculation and real-time energy statistics recording function
  • Multiple load control modes, LED rated current and current percentage can be set
  • Load test function for detecting the system
  • Extensive electronic protections
  • Without any button, parameter setting via RC-10 and FC-01 with IR function.
  • Fully encapsulated PCB, IP68 protection
  • Aluminum housing for better cooling
  • Caratteristiche

    Tensione nominale 12V/24V
    Corrente nominale 10A
    Range Tensione Batteria 9V-32V
    Corrente max Output 2A
    Potenza max PV 30W/12V 60W/24V
    Tipo di batteria AGM, GEL, Elettrolita Liquido, LITIO LiFePO4/Li-NiCoMn
    Autoconsumo ≤18mA(12V);≤23mA(24V)
    Grado di protezione IP68
    Dimensione 108.5x88x25.6mm
    Peso 0.200kg

    Downloads